Jobs

assist the driver in collection of material for customers and dispose in rear of the truck

assist the driver in collection of material for customers and dispose in rear of the truck

General DutiesObserves and obeys all Health & Safety Rules.Observes and obeys all Company Rules.Must be capable of performing all job duties and tasks in their assigned area.Must follow established Processes for designated tasks.To take and follow direction from our qualified designated Management Staff.To Inspect parts, separate good parts / bad parts and Tag appropriately.To remain focused on the job in hand and to never disrupt the other co-workers from their job duties.To report to the designated Supervisor at the start and end of each shift – Sign In & Out For all operational issues to direct all questions through the designated Supervisor.To note and to report to the Supervisor any type of non-conformanities in the day to day operations.To Rework Parts only when in accordance to provided Work Instructions.To complete all job duties within the assigned rate of work set by immediate supervisor and by our Customer.To remove parts from its packaging and to return it back to its packaging with care.To skid and label product – Work In Process (WIP) / Certified Product.Follows and adheres to work instructions – Visual Work Instructions (VWI) and/or Hard Copy (Paperwork) Instructions.Complete paperwork as directed.Have a knowledge of Mobile and Tablet technologyTo work on a production line or off line when and as required.To keep their work cell clean (Zone) and organized at all times (5S).Liaises with other Inspectors and Staff MembersDefers questions / answers his or her immediate Supervisor, when liasioning with Customer or Supplier RepresentativesAbility to use tap and die tools to repair/rework CBU (Completed Body Unit) Ability to use power tools such as rotary tools, grinders, impact drivers, drillsAbility to use cutting tools to precisely repair/rework partsStanding 8-10 hours per shift.Ability to use tools on a production line with non-stationary CBUs

General DutiesObserves and obeys all Health & Safety Rules.Observes and obeys all Company Rules.Must be capable of performing all job duties and tasks in their assigned area.Must follow established Processes for designated tasks.To take and follow direction from our qualified designated Management Staff.To Inspect parts, separate good parts / bad parts and Tag appropriately.To remain focused on the job in hand and to never disrupt the other co-workers from their job duties.To report to the designated Supervisor at the start and end of each shift – Sign In & Out For all operational issues to direct all questions through the designated Supervisor.To note and to report to the Supervisor any type of non-conformanities in the day to day operations.To Rework Parts only when in accordance to provided Work Instructions.To complete all job duties within the assigned rate of work set by immediate supervisor and by our Customer.To remove parts from its packaging and to return it back to its packaging with care.To skid and label product – Work In Process (WIP) / Certified Product.Follows and adheres to work instructions – Visual Work Instructions (VWI) and/or Hard Copy (Paperwork) Instructions.Complete paperwork as directed.Have a knowledge of Mobile and Tablet technologyTo work on a production line or off line when and as required.To keep their work cell clean (Zone) and organized at all times (5S).Liaises with other Inspectors and Staff MembersDefers questions / answers his or her immediate Supervisor, when liasioning with Customer or Supplier RepresentativesAbility to use tap and die tools to repair/rework CBU (Completed Body Unit) Ability to use power tools such as rotary tools, grinders, impact drivers, drillsAbility to use cutting tools to precisely repair/rework partsStanding 8-10 hours per shift.Ability to use tools on a production line with non-stationary CBUs

Job SummaryServes as the first point of contact for customers depositing waste at a Waste Management Facility; calculates payments, checks loads, and ensures the safety of the customer and other employees through observation of safety rules and regulations.II. Essential Duties and Responsibilities include the following. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.• Greets customers, directs customers and other traffic, and answers questions accurately.• Correctly calculates payments for customers.• Ensures that incoming garbage loads are safe and do not contain any inappropriate material.• Ensures that customers and employees conduct all business in a safe manner and wear all required Personal Protective Equipment (PPE).• Provides general upkeep of the Scale House.• Completes all administrative tasks including regular filing, and completes required reports.• Keeps immediate supervisor fully informed of all problems or matters requiring his/her attention.• Attends company sponsored training and meetings as directed.• Works overtime as needed.• Performs other duties as assigned, including data entry and minor customer service responsibilities.• Approaches all encounters with employees, customers and vendors in a friendly, service oriented manner.

Janitorial duties

Aka Skid BuilderAfternoons 1-9pm$20/hrResponsible for building appropriate sized skids to put steel coils on for transport to client.Take over from day shift team to ensure completion of skids production for timely deliver of product for the day.Good knowledge of hand tools, specifically nail gun and hand sawCapable of lifting up to 50lbs – with help – when required.

M-FAfternoons$20/hrReporting to Line SupervisorWorking with a team of 6 existing employeesResponsible for securing steel to the skids using straps and clips.Under direction of line supervisor, guidelines will be given for appropriate completion and timely execution of prep for product to be shipped out.

3 days only!May 5, 2, 7 2022.Pay $22/hrDay shifts3 locations: Downsview- 85 Carl Hall Road – Thursday May 5Boulevard Club – 1491 Lakeshore West (on the lakeshore by the amphitheatre) – Friday May 6Bayview Golf & Country club – 25 Fairway Heights ( Thornhill ) – May 7

M-F$26/hrTraining on days 730am-330pm.Indicate preference of shiftStart date Jan 3 2021 with option for earlierJob responsibilities include, but are not limited to: • Following procedures to safely meet customer expectations • Accurately complete required paperwork • Monitor results and ensure high quality finished products • Help keep our fast-paced plant running smoothly • Assist the Metal Coil Slitting Operator • Handles material from one department to another, such as, • Packaging • Banding • Skidding • Weighing • Identifying • Perform quality checks • Utilize computer skills to enter information required Skills: • Experience in the operation of material handling equipment is an asset • Ability to read instructions from routings • Detail oriented • Strong organization skills • Ability to work safely in a fast-paced, industrial atmosphere • Frequent standing and walking • Able to work independently and in a team environment • High School diploma or GED We are looking for candidates to grow in this position and eventually become a Metal Coil Slitting Operator.

Intersection: Keele & LawrenceWorking hours 6:30 – 4:00pm preferred but can do 7am – 4:30pm tooJob duties:Spring cleaning of the warehouse, (forklift license would be a bonus)Moving things around, sweeping warehouse floor, removing debris (pieces of wood, etc)Restocking shelves (their product is tiles) client estimates lifting up to 30-40lbs during the restocking phase.

Kitting and general warehouse duties

Certified Orderpicker operator with working from heights

Key Requirements:• 5+ years’ experience within a heavy industrial manufacturing role.• 3+ years working in a Team Leader position, evaluating production staff.• Proficient with computers, scanning procedures and data entry.• Mechanically inclined, working knowledge of operating large machinery.Physical Requirements:• Frequent standing and walking for long periods of time.• Continuous manual lifting of equipment and rolls using the dolly.• Must be able to move and pick up 50 lbs. by self.• Must be able to move and pick up 51 to 79 lbs. with assistance.• Over 80 lbs. must request and obtain assistance.Job Responsibilities• Responsible for supervising the work activities for the shift, including assignment of work, andmonitoring daily production requirements.• Leads the onboarding and training of new staff, documenting training records, monitoringprogression, and making recommendations to the Manufacturing Manager of any areas forimprovement.• Provides input and feedback on all direct reports’ performance evaluations and any other employeerelated issues.• Maintaining complete knowledge of and complies with company and departmental policies,procedures, and standards.Albarrie Canada Limited is committed to providing a workplace of diversity and equity, free from harassment and discrimination. As a dedicatedmember of the Excellence in Manufacturing, we continually strive to ensure an optimal healthy and safe working environment. To protect yourpersonal information, all application and resumes will be held for a period of up to 6 months and will be stored or destroyed in a securemanner. Thank you for your interest in joining the Albarrie Canada Limited team, only those contacted will be considered for the position.• Maintains a safe work environment at all times. Monitors and ensures direct reports are meetinghealth and safety standards and providing feedback to Plant Manager of any health and safetyconcerns.• Supervises the heat-setting, coating, and grading of fabrics to meet ISO standards and performsthese duties when required.• Performs the calendaring and singeing to meet ISO standards.• Sets-up finishing equipment as per work order.• Sorts products by style, colour, length or other criteria.• Examines fabric or products for conformity to quality standards.• Marks and repairs minor defects on fabric.• Runs sample fabric trials.• Finishes fabric according to the work order.• Sort products by style, colour, size, length, or other criteria• Supervises the measuring, weighing, and packaging of the finished products when required• Troubleshoots equipment stoppages and notifies maintenance of mechanical malfunctions.• Maintains complete knowledge of and complies with company and departmental policies,procedures, and standards.• Maintains client and company confidence by keeping information confidential and secure• Maintains a positive working relationship with team members and management in a teamenvironment.• Sets-up and organizes individual work area with designated supplies, forms, and resource materialswhile, maintaining cleanliness at all times.

M-FAfternoons (12 noon until 8pm)Weekend availability when require. OT after 40 hours per week.Must be competent in machine operation.No forklift license required but experience an asset – will train in houseOperating- yale propaneOutdoor all terrain load lifter$20/hrSome manual labour required, limited touch when and if product falls off forklift.Start ASAP

Must Have A counter Balance License.Will be Moving Heavy Equipment through warehouse. Receiving – scanning – input information as it comes in. Staging product in the truck.Picking and Packing for customers as it comes in.

-3 positions- Operates machinery, equipment and tools in a safe and efficient manner ∙ Ensure machine guards are in place and material is handled in a safe manner ∙ Must wear appropriate safety equipment as specified ∙ Operation of Overhead Cranes (Training certification required prior to operating) ∙ Use of a measuring tape to check material lengths and bends in steel ∙ Follow work instructions, procedures and adhere to Company policies and rules ∙ Report any unsafe acts or conditions of which you are aware ∙ Maintaining regular attendance, arriving for scheduled shift on-time ∙ Maintaining a clean and organized work area ∙ Adhere to the requirements of section 28 of the Occupational Health & Safety Act Able to work on your feet – repetitive standing / walking ∙ Lifting up to 50 lbs ∙ Must wear hard hat, safety glasses, earplugs, gloves, safety boots∙ Previous experience in a manufacturing, general labour or construction environment (1 – 3 years) ∙ Grade 12 diploma ∙ Previous overhead crane or fork truck operating experience is considered an asset

Forklift operator requiredMust have experience operating Yale Heavy Duty ForkliftOrder PickingLoading

Core Duties Adheres to Technical System Procedures and Instructions Select appropriate quantity, length and gauge of rebar as required for structure being assembled Utilize measuring instruments (tape measure, straight edge, laser sight, jig) as required to properlylocate and space rebar Weld bars using Mig welder Responsible to reload weld wire Change and maintain weld tips to ensure weld quality is consistent Operate overhead crane, once properly certified in crane use Ensure machine guards are in place and material handled in a safe manner Must wear appropriate safety equipment as specified Be able to detect faulty operation of equipment being used as well as faulty material Complete any paperwork that pertains to the job As required, sort and rework defective material, repack and dispose of scrap Working in a non-climate controlled environmentSkills Must be capable of repeated standing, walking, carrying, bending and lifting Frequent lifting of weights up to 50 lbs Ability to maintain a clean and organized work area Ability to read and interpret blueprintsEducation/Experience A formal Welding Certificate is preferred but not required If you have at least one year of MIG welding experience, we would welcome your application.

Core Duties Adheres to Technical System Procedures and Instructions Select appropriate quantity, length and gauge of rebar as required for structure being assembled Utilize measuring instruments (tape measure, straight edge, laser sight, jig) as required to properlylocate and space rebar Weld bars using Mig welder Responsible to reload weld wire Change and maintain weld tips to ensure weld quality is consistent Operate overhead crane, once properly certified in crane use Ensure machine guards are in place and material handled in a safe manner Must wear appropriate safety equipment as specified Be able to detect faulty operation of equipment being used as well as faulty material Complete any paperwork that pertains to the job As required, sort and rework defective material, repack and dispose of scrap Working in a non-climate controlled environmentSkills Must be capable of repeated standing, walking, carrying, bending and lifting Frequent lifting of weights up to 50 lbs Ability to maintain a clean and organized work area Ability to read and interpret blueprintsEducation/Experience A formal Welding Certificate is preferred but not required If you have at least one year of MIG welding experience, we would welcome your application.

The Sorter is responsible for ensuring proper placement and sorting materials on the conveyor line by performing the following duties.II. Essential Duties and Responsibilities include the following. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.• Inspect materials and sort items or materials into piles or places in container according to type, size, condition, coloring or paper grade.• Pull contaminants out of paper or off of floor.• Stack boxes and skids. Dump boxes and totes of material.• Feed material, such as wastepaper onto conveyor.• Clean up conveyor and surrounding sorting line. Keep surrounding work area clean.• Read monitor for machine start up and ensure machine is operating properly and at a moderate speed.• Follow appropriate standard operating procedures (SOPs) as guideline for operating and maintaining equipment.• Report any worker-public safety factors and/or equipment malfunctions.• Attend weekly/monthly safety/operations meetings.• Other duties as assigned.

Basic experience in applying Stucco – tape – trowel – restoration – plastering.Work with cement is an asset. Not a lot of heavy lifting. A lot of time spent on your knees on the floor or on a latter. Always stretching arms and legs. Repetitive motion.Hours are dependent on the jobs each week. They range from Monday-Friday with a start time of anywhere between 7-9 and an end time between 5-7.

This is a role for a Phone receptionist mainly. The first and most important part of the role is to answer phones as they ring. Then they will be directing and transferring the calls to the correct person. To do so they will need to page people. For this reason they need to have perfect english and a minimal accent if any. The second part of the job is data entry. They will be working with accounts payable and receivable doing very entry level data input. Ideally this candidate will have a generic but working knowledge of excel. Enough to know how to input numbers into it and enough to know how to not mess up any already inputted fields. They will not be working with formulas or anything. Basic understanding of how to bold, italic, change color of and navigate through an excel document. The role is from Monday-Friday 8-4. It is an 8 hour work day and they are paid while on their half hour lunch break. Ideally they want them to start out as a temp and turn to perm at the end of the 26 weeks. Located in Burlington, paying $20 an hour. Cheryl suggested looking for candidates from Hamilton and Oakville. (She has had the most success keeping these candidates as it is closer.)

-Door Hanger Position -General Knowledge of Tools-Must have their own tools (a basic set of hand tools) wrenches, screw drivers, & socket.-Attention to detail

-They would be reading blue prints and drawings as well as reading or taking measurements to plan layout-Assembling truck bodies and parts after the paint job is completed. (Installing locks, lighting and hardware.) -Wiring of the 12-volt electrical system-Installing the hydraulic system (PTO, pumps, compressors…) -Testing assembled products before finished. -Maintain and utilize the equipment so that it remains within safety protocol.

Welders – 2 (($23-$28) recommended $25 to startMIG welders with aluminum experienceDay shift M-T 6-330pm and Friday 6-230pmOT after 44 hours a weekFor Aluminum – Pulse machine is usedFor Steel – Flux Core is used.The candidates can fall in any of these categories. Jr – Intermediate – Senior roles within this pay scaleJr.-no formal training in blueprint reading-fresh out of trade school-minimul experienceIntermediate.-no formal training in blue print reading but has experience or self taught-knows different welding symbols-experience in both steel and aluminum-requires little supervision and minima deficiencies in weldingSenior.-ability to move and desire to want to take on lead hand role-5-10 years experience-formal training – college, certifications, etc.

Job details:Loading and Unloading containersStacking palletsMoving boxesAble to use pump truckAble to lift up to 50 lbs.Other duties as assigned

This will be clearing out the documents on a racking system to clear room for a new shop to be put in. You will be pulling down paper work from racking systems. You will then put the boxes on skids and wrapping it for transportation. Boxes weight between 25-35 pounds. They will have hand pallets and pump trucks, mag liner (cart to pull boxes.)

Core Duties Adheres to Technical System Procedures and Instructions Select appropriate quantity, length and gauge of rebar as required for structure being assembled Utilize measuring instruments (tape measure, straight edge, laser sight, jig) as required to properlylocate and space rebar Weld bars using Mig welder Responsible to reload weld wire Change and maintain weld tips to ensure weld quality is consistent Operate overhead crane, once properly certified in crane use Ensure machine guards are in place and material handled in a safe manner Must wear appropriate safety equipment as specified Be able to detect faulty operation of equipment being used as well as faulty material Complete any paperwork that pertains to the job As required, sort and rework defective material, repack and dispose of scrap Working in a non-climate controlled environmentSkills Must be capable of repeated standing, walking, carrying, bending and lifting Frequent lifting of weights up to 50 lbs Ability to maintain a clean and organized work area Ability to read and interpret blueprintsEducation/Experience A formal Welding Certificate is preferred but not required If you have at least one year of MIG welding experience, we would welcome your application.

Crowne Raymond Reach Operator 2-3 weeks for cover offStart Monday Feb 28 2022May have possibility of extension9-530pm (Most days will be this time but candidate needs to be flexible and open to staying longer if the job is not complete for the day)M-F$23/hrMasks are provided by United.Will have temp taken each day upon entry.Interview to be set for Monday at 9am – upon successful interview will be certified by trainer and will work for the remainder of the day

Courier processing experience – through Fedex and Puro shipping systems

Loading and unloading freight. Move appliances and furniture – product comes in bulk, shunters and warehouse associates must break down decipher, receive orders, ensure order accuracy, reload other trucks with orders and pack accordingly for customer delivery. Must be able to use furniture moving tools with ease. Ability to move heavy objects with use of moving tools easily. Detail oriented for both product quality and order accuracy.

Loading and unloading freight. Move appliances and furniture – product comes in bulk, shunters and warehouse associates must break down decipher, receive orders, ensure order accuracy, reload other trucks with orders and pack accordingly for customer delivery. Must be able to use furniture moving tools with ease. Ability to move heavy objects with use of moving tools easily. Detail oriented for both product quality and order accuracy.

Loading and unloading freight. Move appliances and furniture – product comes in bulk, shunters and warehouse associates must break down decipher, receive orders, ensure order accuracy, reload other trucks with orders and pack accordingly for customer delivery. Must be able to use furniture moving tools with ease. Ability to move heavy objects with use of moving tools easily. Detail oriented for both product quality and order accuracy.

Local

-Afternoon Fork Lift Driver Monday-Thursday. -Counter Balance-Extended Forks-Either placed as a shipper/receiver (unloading and loading trucks.) Or is in the plant moving things from place to place.-Busy Environment.-1 Year of Ex. Experience with Extended forks is an asset.-History in packing companies is an asset.

-5 open positions-Operates machinery, equipment and tools in a safe and efficient manner ∙ Ensure machine guards are in place and material is handled in a safe manner ∙ Must wear appropriate safety equipment as specified ∙ Operation of Overhead Cranes (Training certification required prior to operating) ∙ Use of a measuring tape to check material lengths and bends in steel ∙ Follow work instructions, procedures and adhere to Company policies and rules ∙ Report any unsafe acts or conditions of which you are aware ∙ Maintaining regular attendance, arriving for scheduled shift on-time ∙ Maintaining a clean and organized work area ∙ Adhere to the requirements of section 28 of the Occupational Health & Safety Act Able to work on your feet – repetitive standing / walking ∙ Lifting up to 50 lbs ∙ Must wear hard hat, safety glasses, earplugs, gloves, safety boots∙ Previous experience in a manufacturing, general labour or construction environment (1 – 3 years) ∙ Grade 12 diploma ∙ Previous overhead crane or fork truck operating experience is considered an asset

Data entry/entering data from various sources into the company computer system for processing and management

-Working on the assembly line-Must have an eye for accuracy, and a good communication-Follow the order process-Must be able to lift up to 25lbs when required-Other duties as assigned -Looking for a good attitude and someone who will go to work every day.

FL OperatingWrapping SkidsLoading and unloading.

Afternoone 2pm-10pm- Operates machinery, equipment and tools in a safe and efficient manner ∙ Ensure machine guards are in place and material is handled in a safe manner ∙ Must wear appropriate safety equipment as specified ∙ Operation of Overhead Cranes (Training certification required prior to operating) ∙ Use of a measuring tape to check material lengths and bends in steel ∙ Follow work instructions, procedures and adhere to Company policies and rules ∙ Report any unsafe acts or conditions of which you are aware ∙ Maintaining regular attendance, arriving for scheduled shift on-time ∙ Maintaining a clean and organized work area ∙ Adhere to the requirements of section 28 of the Occupational Health & Safety Act Able to work on your feet – repetitive standing / walking ∙ Lifting up to 50 lbs ∙ Must wear hard hat, safety glasses, earplugs, gloves, safety boots∙ Previous experience in a manufacturing, general labour or construction environment (1 – 3 years) ∙ Grade 12 diploma ∙ Previous overhead crane or fork truck operating experience is considered an asset

Days 6am-2pm- Operates machinery, equipment and tools in a safe and efficient manner ∙ Ensure machine guards are in place and material is handled in a safe manner ∙ Must wear appropriate safety equipment as specified ∙ Operation of Overhead Cranes (Training certification required prior to operating) ∙ Use of a measuring tape to check material lengths and bends in steel ∙ Follow work instructions, procedures and adhere to Company policies and rules ∙ Report any unsafe acts or conditions of which you are aware ∙ Maintaining regular attendance, arriving for scheduled shift on-time ∙ Maintaining a clean and organized work area ∙ Adhere to the requirements of section 28 of the Occupational Health & Safety Act Able to work on your feet – repetitive standing / walking ∙ Lifting up to 50 lbs ∙ Must wear hard hat, safety glasses, earplugs, gloves, safety boots∙ Previous experience in a manufacturing, general labour or construction environment (1 – 3 years) ∙ Grade 12 diploma ∙ Previous overhead crane or fork truck operating experience is considered an asset

assist the driver in collection of material for customers and dispose in rear of the truck

assist the driver in collection of material for customers and dispose in rear of the truck

-Heaviest weight to be lifted – 55 pounds. -Regular weight of average product – 20 pounds.-Confirmed address – 195 Edward Street St Thomas ON-Experience Required: Good attitude, attention to detail, Keeps moving without being told. Must be willing to fill down time with cleaning of warehouse. This is a potential to full time and could be a great opportunity for someone to obtain full time work with benefits.

Responsibilities:• Take part in the complete assembly of front-end power train modules (engine, transmissions, rads, strut knuckles, etc) for the Chevy Equinox.• Assemble fabricated parts in accordance with established procedures and guidelines to ensure quality, safety, and productivity standards are met to satisfy customer requirements.• Operate hand tools, pneumatic power tools and lift assists.• High volume and fast paced environment.• Just-in-Time (JIT) facility.Successful applicants must have the following skills and abilities:• Grade 12 diploma, equivalency or work-related experience• Experience in an assembly/manufacturing/production environment an asset• Mechanically inclined with excellent eye-hand coordination• Conscientious with attention to detail

Load and unload construction materials, glass sheets, doors and move materials to work areas.Assist glaziers with installation of glass and framing. Set up and operate mitre saws and drills.Cut, shape, and smooth frame materials (e.g. u-channels, rails, metals, extrusions) according to measurementsAdhere to applicable safety and environmental standards, regulations and company policies.Perform other activities at constructions sites as directed. Safe and proper use of tools, equipment and trade skills and techniques.Working at Heights Certificate not required but must be willing to get and own expense. WHIMS and 4 Steps in Health and Safety Certificates and Full G driver’s licence. Reliable transportation.

Local

Warehouse picker/packer-pick orders from pick list-package items and put into shipping boxes-use computer shipping system-other general warehouse duties ie. cleaning, sweeping etc Knowledge of SPS Commerce would be an asset.